D.L.S., accredited to ISO 17025, supports testing programs for MIL-STD 461 Revision A-G. Mil- STD 461 is applicable for testing on military equipment and components including electrical, electronic, electromechanical equipment, materials and sub systems for aircraft, shipboard, above and below deck, submarines, communications equipment, vehicles and support equipment, electronic enclosures, electric power inputs, equipment racks, waste systems, galley equipment, and other armed services applications.

D.L.S. offers specially equipped larger testing chambers to support complex systems and equipment  and can provide support equipment such as shielded load rooms, self-contained elthelyne glycol and cooling fluids, air conditioning to support unique temperature extremes, ability to control vehicle and related engine exhaust.

Testing Requirements for MIL-STD-461 D-G

  • Radiated Emissions 
    • RE101 – Magnetic Field (30 Hz to 100 kHz)
    • RE102 – Electric Field (10 kHz to 18 GHz)
    • RE103 – Antenna Spurious and Harmonic Outputs (10 kHz to 40 GHz)
    • CE101 – Power Leads (30 Hz to 10 kHz)
    • CE102 – Power Leads (10 kHz to 10 MHz)
    • CE106 – Antenna Terminals (10 kHz to 40 GHz)
  • Radiated Susceptibility  
    • RS101 – Magnetic Field (30 kHz to 100 kHz)
    • RS103 – Electric Field (2 MHz to 40 GHz)
    • RS105 – Electromagnetic Pulse
  • Conducted Susceptibility        
    • CS101 – Power Leads (30 Hz to 150 kHz)
    • CS103 – Antenna Port-Intermodulation (15 kHz to 10 GHz)
    • CS104 – Antenna Port Rejection of Undesired Signals (30 Hz to 20 GHz)
    • CS105 – Antenna Port-Cross modulation (30 Hz to 20 GHz)
    • CS109 – Structure Current-Spike (60 Hz to 100 kHz)
    • CS114 – Bulk Cable Injection (10 kHz to 200 MHz)
    • CS115 – Bulk Cable Injection-Impulse Excitation
    • CS116 – Damped Sinusoidal Transients (10 kHz to 100 MHz)
    • CS117 – Lightning Induced Transients
    • CS118 – Personnel Borne Electrostatic Discharge

We also perform testing to requirements for MIL-STD-461 A-C

  • Radiated Emissions
    • RE01 – Magnetic Field (30 Hz to 50 kHz)
    • RE02 – Electric Field (14 kHz to 10 GHz)
    • RE03 – Antenna Spurious and Harmonic Outputs
  • Conducted Emissions     
    • CE01 – Power Leads (up to 15 kHz)
    • CE03 – Power Leads (15 kHz to 50 MHz)
    • CE06 – Antenna Terminals (10 kHz to 26 GHz)
  • Radiated Susceptibility   
    • RS01 – Magnetic Field 30 Hz to 50 kHz)
    • RS02 – Magnetic Induction Field, Spikes and Power Frequencies
    • RS03 – Electric Field (14 kHz to 40 GHz)
  • Conducted Susceptibility 
    • CS01 – Power Leads (30 Hz to 50 MHz)
    • CS02 – Power Leads (50 kHz to 400 MHz)
    • CS03 – Intermodulation (15 kHz to 10 GHz)
    • CS04 – Rejection of Undesired Signals (30 Hz to 20 GHz)
    • CS05 – Cross-modulation (30 Hz to 20 GHz)
    • CS06 – Spikes, Power Leads
    • CS07 – Squelch Circuits
    • CS09 – Common Mode Current (60 Hz to 100 kHz)

D.L.S. supports testing services with one of the largest iNARTE certified engineering staffs in the industry, experienced in all aspects of testing support, mitigation, troubleshooting, as well as test plan and procedure preparation.

D.L.S. offers one stop testing capabilities for testing on military applications for EMI/EMC, Environmental, Power Quality and other applicable testing services. Contact us today.