|
MIL-STD
CONDUCTED EMISSIONS TESTING
|
|||||||||||
|
Specific Conducted Emissions Requirements Mil-Std 461E CE101 - Power Leads (30 Hz to 10 kHz) This level of low
frequency testing is most applicable to the following platforms: |
|||||||||||
![]() |
|||||||||||
|
CE102 - Power Leads (10 kHz to 10 MHz) Similar in test to CE101, but at a higher frequency. Additionally,
this test has a much wider application and is required on the following
platforms, systems, and subsystems: |
|||||||||||
|
|
|||||||||||
|
CE106 - Antenna Terminals (10 kHz to 40 GHz) This testing is applicable to most antenna terminals if receivers, transmitters, and amplifiers, with an exception of equipment designed with a permanently mounted antenna to the equipment under test. It has been recently modified to include amplifiers. This test has wide applicable and is required on: |
|||||||||||
| top of page | |||||||||||
|
|
|||||||||||
![]() |
|||||||||||
|
1250
Peterson Drive Wheeling, IL 60090 847-537-6400
(phone) 847-537-6488 (fax)
|
|||||||||||
|
D.L.S.
Electronic Systems, Inc. Copyright ©2008, All rights reserved
|
Questions,
Comments, or Suggestions? Contact Marc Hess: mhess@dlsemc.com
|
||||||||||